Telnet to a Serial Port
2007-12-25 12:00:00
good ones, but the solution was relatively simple. First, there's no
need to mess with any eeprom settings, the defaults for "ttya-ignore-cd=true"
do just fine. All that was required was to 1) wire the DB25 to RJ45
to the DTE pin outs (which I had) and 2) access the serial port manager
from "admintool", use the "hardwired" template and select "Software
Carrier" as an option (which I didn't). That's it... Pretty simple
Thanks again to all that replied.
Frank
------------------------------------------------------------------
_/_/ _/_/ _/_/_/_/ _/_/_/ Frank C. Everitt
_/_/ _/ _/ _/ _/ MCI Network Services
_/ _/ _/ _/ _/ _/ UNIX Systems Engineer
_/ _/ _/ _/ _/ Research Triangle Park, NC 27709
_/ _/ _/ _/ _______________________________
_/ _/ _/ _/ e-mail: Frank.Everitt@mci.com
_/ _/ _/_/_/_/ _/_/_/ (919) 572-3040, VNET: 952-3040
------------------------------------------------------------------
>Hey Guru's, I need your help.....
> I'm trying to connect that serial port on my Sparc20 (sol2.5.1)
>to a terminal annex. On a server without a monitor and keyboard, I've
>been successful in making a "console" connection. However, taking
>this just one step farther, I need to be able to create a telnet session
>on the serial port of a machine that has a monitor and keyboard attached.
>I've talked with Sun, but nothing yet. All help will be appreciated.
>As always, I'll summarize.
>
>
>Thanks in advance.....
>
>
>------------------------------------------------------------------
> _/_/ _/_/ _/_/_/_/ _/_/_/ Frank C. Everitt
> _/_/ _/ _/ _/ _/ MCI Network Services
> _/ _/ _/ _/ _/ _/ UNIX Systems Engineer
> _/ _/ _/ _/ _/ Research Triangle Park, NC 27709
> _/ _/ _/ _/ _______________________________
> _/ _/ _/ _/ e-mail: Frank.Everitt@mci.com
> _/ _/ _/_/_/_/ _/_/_/ (919) 572-3040, VNET: 952-3040
>
>------------------------------------------------------------------
Comments
Got something to say?
You must be logged in to post a comment.
