Performance
2007-12-24 20:57:00
I have installed Solaris 8 on 420R . The latest Adrian tool ( SE Toolkit )
is running on this machine. It's complaining about following network
problems.
The same system and Network card was working fine on Solaris 2.6. After
installing Solaris 8, I found this this type of errors.
AGGREGATE NETWORK INFORMATION
Overall state of the network interfaces:
black Problem: network failure
Errors seen, fix hardware or cables
State Name Ipkt/s Opkt/s Err/s Coll% NoCanPut/s
Defer/s
black hme0 36.4 13.7 0.53 7.56 0.00
0.00
TCP measures Total Rate/s
Input bytes 12928 718.22
Output bytes 116092 6449.56
Retransmit bytes 7096 6.11%
Connections 0 0.00
ETHERNET RULE THRESHOLDS
ENET_INUSE default=50.0/s getenv=50.0/s ignore
fewer output packets/s
ENET_COLL_WARNING default=15.0% getenv=15.0%
ENET_COLL_PROBLEM default=30.0% getenv=30.0%
ENET_ERROR_PROBLEM default=0.050/s getenv=0.050/s
ENET_DEFER_WARNING default=2.00% getenv=2.00% some
delayed output packets
ENET_DEFER_PROBLEM default=10.00% getenv=10.00% too many
delayed output packets
ENET_NOCANPUT_PROBLEM default=1.000/s getenv=1.000/s
incoming packet dropped by IP
I have used the following commands, still I am getting same
errors.
ndd -set /dev/hme instance 0
ndd -set /dev/hme adv_100T4_cap 0
ndd -set /dev/hme adv_100fdx_cap 1
ndd -set /dev/hme adv_100hdx_cap 0
ndd -set /dev/hme adv_10fdx_cap 0
ndd -set /dev/hme adv_10hdx_cap 0
ndd -set /dev/hme adv_autoneg_cap 0
Can any one help me to solve the problem.
Thanks in advance
Karan
Comments
Got something to say?
You must be logged in to post a comment.
