DiskSuite Issue
2007-12-25 5:01:00
I have Netra box with two D1000 attached running Solaris 2.6. I have
installed Disksuite 4.2 and have created two Metadevice with RAID- 5 on
each D1000. One week back I lost One Disk with error (Need Maintenance)
and other with "Last Erred". As per Sun Documentation I replaced the
disk with error "Need Maintenance" first and resynced but after
resyncing it again showed the same error "Maintenance" I put another
Disk and tried to resync but no luck. At last I use another slot from
D1000 (one Slot was HotSpare) and tried to resync but it seems it
doesn't come as Good after resync is done. I can still see the Data on
D1000. What could be the issue? I have 160 GB of Data sitting on this
D1000. Other D1000 attached to same Box is working fine.
Below is the output from metadevice:
d1: RAID
State: Needs Maintenance
Invoke: metareplace -f d1 c2t3d0s0 <new device>
Hot spare pool: hsp002
Interlace: 32 blocks
Size: 353442528 blocks
Original device:
Size: 353443520 blocks
Device Start Block Dbase State Hot Spare
c2t0d0s0 330 No Okay
c2t1d0s0 330 No Okay
c2t2d0s0 330 No Okay
c2t3d0s0 330 No Maintenance
c2t4d0s0 330 No Okay
c2t5d0s0 330 No Okay
c2t8d0s0 330 No Okay
c2t9d0s0 330 No Last Erred
c2t10d0s0 330 No Okay
c2t11d0s0 330 No Okay
c2t12d0s0 330 No Okay
Any Help/Pointer will be appreciated.
I will summarize.
TIA
B
Comments
Got something to say?
You must be logged in to post a comment.
