Disksuite problem missing some data...
2007-12-24 21:51:00
doing one thing at a time because I never should have put myself in this
position but I believe I am SOL, and have lost data.
Here was my previous setup:
Sun E220 --> D1000 with 6 internal disks.
First three disks were setup as a concat/stripe partition.
Second three disks were not used.
I have migrated the machine into an E450 and in the process already
recreated my metadb data and cannot go back to the previous setup. I have
put all the disks (exception of two -- one I know was not used and another
I'm not sure where it was is being used somewhere else now) into the E450,
and only one of them shows anything on it.
/dev/dsk/c0t1d0s0 105018845 18446744072097062551 1716457722
17742601091883% /mnt/disk1
/dev/dsk/c0t2d0s0 35007716 9 34657630 1% /mnt/disk2
/dev/dsk/c0t3d0s0 35007716 9 34657630 1% /mnt/disk3
I am hoping that somewhere in there is my data that I need, but how do I go
about getting it back? I have tried to re-create the concat/stripe but have
no luck going that route and keep fearing that I will lose my data since I
have no backup that will put me in a better position than I am now.
All I need to be able to do is get my data in readable format so that I can
move it somewhere else or atleast
verify it against what I thought was a copy of the origonal setup on another
disk...
Anyone who can help!?!? I will send a summary pending the help.
thanks,
- Steve
Comments
Got something to say?
You must be logged in to post a comment.
