Problem booting Netra X1 - help!
2007-12-24 20:30:00
now - suddenly it went dark last night, so I went to the datacenter, checked
it out with LOM, restarted it, and every time I try booting it, it gets as
far as testing RAM banks, and just pulls this:
Probing /pci at 1f,0 Device 7 isa dma rtc power SUNW,lomh serial serial
flashprom
Probing /pci at 1f,0 Device 3 pmu i2c temperature dimm i2c-nvram idprom
motherboard-fru ppm beep fan-control
lomp
Probing Memory Bank #0 0 Megabytes
Probing Memory Bank #1 0 Megabytes
Probing Memory Bank #2 0 Megabytes
Probing Memory Bank #3 128 Megabytes
**********************************************
PSTATE=0000000000000015 TBA=00000000f0000000 DCU
Control=0000000000000000
AFSR=ffffffff80300000 AFAR=0000000067f03000 PIL=000000000000000d
I-SFSR=0000000000230080 D-SFSR=0000000000000000 D-SFAR=000007ddb7ffffff
TL=0005 TT=0068 TPC=00000000f0053c3c TNPC=00000000f0053c40
TL=0004 TT=0068 TPC=00000000f0053c3c TNPC=00000000f0053c40
TL=0003 TT=0068 TPC=00000000f0053c3c TNPC=00000000f0053c40
TL=0002 TT=0068 TPC=00000000f000302c TNPC=00000000f0003030
TL=0001 TT=0063 TPC=00000000f0008084 TNPC=00000000f0008088
**********************************************
And then it repeats the part between the *** lines over and over and over
again to the console port. Any ideas what is going on? I'm running SunOS
5.8, never been patched, and it's been running just fine for about a month.
Please help!
Comments
Got something to say?
You must be logged in to post a comment.
