No Link Gigaswift in Ultra 10
2007-12-25 6:28:00
a brand new Gigaswift Quad (ce) card. However, I'm
not getting link. The OS sees the card. I can configure
them. The kstat(1M) is appended. However, no link
lights on the card or switch. The OS reports no link.
The switch reports no link. Another Sun with ce interfaces
and crossover cables reports no link. All of these links
worked with the previous qfe card.
The system is an Ultra 10 with Solaris 9. The ce is
in PCI 2. There is still a qfe in PCI 1. It still works
fine.
# kstat -m ce -i 0
module: ce instance: 0
name: ce0 class: net
adv_cap_1000fdx 1
adv_cap_1000hdx 1
adv_cap_100T4 0
adv_cap_100fdx 1
adv_cap_100hdx 1
adv_cap_10fdx 1
adv_cap_10hdx 1
adv_cap_asmpause 0
adv_cap_autoneg 1
adv_cap_pause 0
alignment_err 0
brdcstrcv 0
brdcstxmt 0
cap_1000fdx 1
cap_1000hdx 1
cap_100T4 0
cap_100fdx 1
cap_100hdx 1
cap_10fdx 1
cap_10hdx 1
cap_asmpause 0
cap_autoneg 1
cap_pause 0
code_violations 0
collisions 0
crc_err 0
crtime 13.519968657
excessive_collisions 0
first_collision 0
ierrors 0
ifspeed 0
ipackets 0
ipackets64 0
ipackets_cpu00 0
ipackets_cpu01 0
ipackets_cpu02 0
ipackets_cpu03 0
late_collisions 0
lb_mode 0
length_err 0
link_T4 0
link_asmpause 0
link_duplex 0
link_pause 0
link_speed 0
link_up 0
lp_cap_1000fdx 0
lp_cap_1000hdx 0
lp_cap_100T4 0
lp_cap_100fdx 0
lp_cap_100hdx 0
lp_cap_10fdx 0
lp_cap_10hdx 0
lp_cap_asmpause 0
lp_cap_autoneg 0
lp_cap_pause 0
mac_mtu 1522
mac_reset 0
mdt_hdr_bind_fail 0
mdt_hdr_bufs 0
mdt_hdrs 0
mdt_pkts 0
mdt_pld_bind_fail 0
mdt_pld_bufs 0
mdt_plds 0
mdt_reqs 0
multircv 0
multixmt 0
norcvbuf 0
noxmtbuf 0
obytes 0
obytes64 0
oerrors 0
opackets 0
opackets64 0
pci_bad_ack_err 0
pci_bus_speed 33
pci_dmarz_err 0
pci_dmawz_err 0
pci_drto_err 0
pci_err 0
pci_parity_err 0
pci_rma_err 0
pci_rta_err 0
peak_attempts 0
promisc off
qos_mode 0
rbytes 0
rbytes64 0
rev_id 48
rx_allocb_fail 0
rx_hdr_drops 0
rx_hdr_pkts 0
rx_inits 0
rx_jumbo_pkts 0
rx_len_mm 0
rx_msgdup_fail 0
rx_mtu_drops 0
rx_mtu_pkts 0
rx_new_hdr_pgs 0
rx_new_mtu_pgs 0
rx_new_nxt_pgs 0
rx_new_pages 0
rx_no_buf 0
rx_no_comp_wb 0
rx_nocanput 0
rx_nxt_drops 0
rx_ov_flow 0
rx_pkts_dropped 0
rx_rel_bit 0
rx_rel_flow 0
rx_reused_pgs 0
rx_split_pkts 0
rx_tag_err 0
rx_taskq_waits 0
snaptime 3597.742237647
trunk_mode 0
tx_allocb_fail 0
tx_ddi_pkts 0
tx_dma_bind_fail 0
tx_dvma_pkts 0
tx_hdr_pkts 0
tx_inits 0
tx_jumbo_pkts 0
tx_max_pend 0
tx_max_pkt_err 0
tx_msgdup_fail 0
tx_no_desc 0
tx_nocanput 0
tx_queue0 284111
tx_queue1 0
tx_queue2 0
tx_queue3 0
tx_starts 0
tx_uflo 0
xcvr_addr 1
xcvr_id 536894584
xcvr_inits 3
xcvr_inuse 1
--
Crist J. Clark crist.clark at globalstar.com
Globalstar Communications (408) 933-4387
B<information contained in this e-mail message is confidential, intended only
for the use of the individual or entity named above. If the reader of this
e-mail is not the intended recipient, or the employee or agent responsible to
deliver it to the intended recipient, you are hereby notified that any review,
dissemination, distribution or copying of this communication is strictly
prohibited. If you have received this e-mail in error, please contact
postmaster at globalstar.com
Comments
Got something to say?
You must be logged in to post a comment.
