Large disk in Netra X1 ?

2007-12-25 4:22:00

I'm trying to upgrade the internal disks of a Netra X1 to use as an FTP
server. I took out the factory 20GB disk and replaced it with a new 160GB
disk (Seagate ST3160023A). The disk is seen properly from openboot:
ok probe-ide
Device 0 ( Primary Master )
ATA Model: ST3160023A

but format sees the disk as having only 0.5GB:
Primary label contents:

Volume name = < >
ascii name = <ST3160023A cyl 255 alt 2 hd 16 sec 255>
pcyl = 257
ncyl = 255
acyl = 2
nhead = 16
nsect = 255
Part Tag Flag Cylinders Size Blocks
0 unassigned wm 0 0 (0/0/0) 0
1 unassigned wm 0 0 (0/0/0) 0
2 backup wu 0 - 254 508.01MB (255/0/0) 1040400
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 0 0 (0/0/0) 0

I have several V100 with disks upgraded to 80GB without problem, so what's
going on with this one ?

--
Christophe Dupre
System Administrator, Scientific Computation Research Center
Rensselaer Polytechnic Institute
Troy, NY USA
Phone: (518) 276-2578 - Fax: (518) 276-4886

Actived: 0 answers; - size: 1547 bytes; - view related info - Similar thread

Comments

Got something to say?

You must be logged in to post a comment.

thatsjava.com

Large disk in Netra X1 ?

Comments