SUMMARY: OS level equivalent command to probe-scsi-all?
2007-12-24 21:46:00
There were many that suggested that I use format, which would have worked
if I was dealing with disks but as I was having trouble with tapes so it
didn't do the trick.
Many also suggested using prtconf and prtdiag, but these didn't spit out
all the info I was looking for.
Anil Sreedharan, mentioned that if you have Netbackup installed (I did)
then you can use /usr/openv/volmgr/bin/sgscan This worked exactly as I
needed but isn't a very generic solution.
Many pointed me to a freeware utility called scsiinfo which can be found
at http://www.cs.toronto.edu/~jdd/ I didn't try this but it looks like
it'll do what I wanted.
And the big winner was Doug Floer, who's 9 character email seems to work
pretty much on any stock machine:
iostat -E
Great way to use a tool that was designed for something else.
In the end my problem turned out to be a bent pin on one of the SCSI
cables :)
-Josh
-----Original Message-----
From: Josh Lukens [mailto:josh.lukens at us.ubizen.com]
Sent: Thursday, January 31, 2002 11:10 AM
To: Sunmanagers
Subject: OS level equivalent command to probe-scsi-all?
Hi all,
This is probably a stupid question, but I can't figure it out and I think
I'm missing something really obvious. I need to find a OS level command
(Solaris 7, on sparc) that will give me similar information to what a
probe-scsi-all would give me from the ok prompt. Basically what SCSI
devices are connected to what, with what IDs, and their vendor description
strings.
Will summarize, thanks,
-Josh
[demime 0.99c.1 removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
Comments
Got something to say?
You must be logged in to post a comment.
