TRY AGAIN - E250 faulty, but which part? (Complete)
2007-12-25 1:50:00
I am getting exactly the same error on running the diagnostics for my E250
running Solaris 8.
I am able to boot the system in single user mode. However /var directory is
empty.
Rebooting gives an error indicating that /var/adm/utmpx cannot be accessed.
Can somebody shed some light on this ?
Is this is disk problem ? Can it be fixed ?
Any suggestions/ideas/RTFMs appreciated.
TIA,
Samir
>Hi All
>
>On the face of it, this appears to be a motherboard fault, but in the
>ineterest of completeness, has anyone seen this and it not be a
>motherboard, but another component eg memory DIMM?
>
>I've run a low-level diagnostic and intermittantly get the following:
>
>Testing /pci at 1f,4000/scsi at 3,1
>Bus fault
>
> ERROR : move-memory failed with a result = fd
> DEVICE : /pci at 1f,4000/scsi at 3,1
> FRU : motherboard
> TIME : 06/20/2003 13:26:16 GMT
> CALLER : )warning transfer-pattern scsi-dma-test ...
>
>The /pci at 1f,4000/scsi at 3,1 selftest failed. Return code = 1
>Testing /pci at 1f,4000/scsi at 3
>Bus fault
>
> ERROR : move-memory failed with a result = fd
> DEVICE : /pci at 1f,4000/scsi at 3
> FRU : motherboard
> TIME : 06/20/2003 13:26:22 GMT
> CALLER : )warning transfer-pattern scsi-dma-test ...
>
>The /pci at 1f,4000/scsi at 3 selftest failed. Return code = 1
>Testing /pci at 1f,4000/network at 1,1
>
>Fast Data Access MMU Miss
>
>Thanks
>
>Peter
>----------------------------
>Peter Stokes
>Ashlyn Computer Services Ltd
>Tel: +44 (0)1636-627900
>Mbl: +44 (0)7977-532320
>Fax: +44 (0)1636-627909
>----------------------------
Comments
Got something to say?
You must be logged in to post a comment.
