adding memory to E250
2007-12-25 1:33:00
wanted to up it to 2GB.
Slot 0 was originally filled, and I populated slots 1-3 with the extra
1.5GB. For some reason
I can only see 1.5GB total system memory. The original 512MB was Samsung,
the new 1.5GB was from
some other maker (doesn't say which. There's a big M and some numbers on
the little sticker on
each DIMM). I bought it from the same vendor who sold us the box
originally. Below is the result
of prtdiag -v.
Thoughts?
--------------------- prtdiag -v --------------------------------------
System Configuration: Sun Microsystems sun4u Sun (TM) Enterprise 250 (2 X
UltraSPARC-II 400MHz)
System clock frequency: 100 MHz
Memory size: 1536 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
--- --- ------- ----- ------ ------ ----
SYS 0 0 400 2.0 US-II 10.0
SYS 1 1 400 2.0 US-II 10.0
========================= Memory =========================
Interlv. Socket Size
Bank Group Name (MB) Status
---- ----- ------ ---- ------
0 none U0701 128 OK
0 none U0801 128 OK
0 none U0901 128 OK
0 none U1001 128 OK
0 none U0702 128 OK
0 none U0802 128 OK
0 none U0902 128 OK
0 none U1002 128 OK
0 none U0703 128 OK
0 none U0803 128 OK
0 none U0903 128 OK
0 none U0704 128 OK
0 none U0804 128 OK
0 none U0904 128 OK
0 none U1004 128 OK
1 none U0702 128 OK
1 none U0802 128 OK
1 none U0902 128 OK
1 none U1002 128 OK
1 none U0703 128 OK
1 none U0803 128 OK
1 none U0903 128 OK
1 none U0704 128 OK
1 none U0804 128 OK
1 none U0904 128 OK
1 none U1004 128 OK
3 none U0704 128 OK
3 none U0804 128 OK
3 none U0904 128 OK
3 none U1004 128 OK
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- --------------------------------
----------------------
SYS PCI 33 0 SUNW,m64B SUNW,370-4362
SYS PCI 33 2 scsi-pciclass,001000 Symbios,53C875
SYS PCI 66 3 ANTR,ge-pci1754,9021 P-1054/1055
No failures found in System
===========================
========================= Environmental Status =========================
System Temperatures (Celsius):
------------------------------
CPU0 40
CPU1 40
MB0 31
MB1 25
PDB 25
SCSI 24
=================================
Front Status Panel:
-------------------
Keyswitch position is in On mode.
System LED Status: DISK ERROR POWER
[OFF] [ ON]
POWER SUPPLY ERROR ACTIVITY
[OFF] [OFF]
GENERAL ERROR THERMAL ERROR
[OFF] [OFF]
=================================
Disk LED Status: OK = GREEN ERROR = YELLOW
DISK 5: [OK] DISK 3: [OK] DISK 1:
[OK]
DISK 4: [OK] DISK 2: [OK] DISK 0:
[OK]
=================================
Fan Bank :
----------
Bank Speed Status
(0-255)
---- ----- ------
SYS 162 OK
=================================
Power Supplies:
---------------
Supply Status
------ ------
0 OK
1 OK
========================= HW Revisions =========================
ASIC Revisions:
---------------
STP2223BGA: Rev 4
STP2003QFP: Rev 1
System PROM revisions:
----------------------
OBP 3.26.0 2002/05/06 15:57 POST 6.1.0 2002/05/06 15:58
Comments
Got something to say?
You must be logged in to post a comment.
