StorEdge 3310 Problem
2007-12-25 3:40:00
i am running solaris 9 on 280R and trying to setup my sunStoredge 3310. I have created RAID 5 logic drive & two Partition as follow
Logic al Drive 0 [4db56737] RAID 5 [209253MB]
Logical Drive 0 Partition 0 [100000MB] Map 1.0.0
Logical Drive 0 Partition 0 [109253MB] Map 1.0.1
The Solaris only recognised only first partition !
I have changed the sd.conf
starting here.
name="sd" class="scsi"
target=1 lun=1;
name="sd" class="scsi"
target=1 lun=2;
name="sd" class="scsi"
target=1 lun=3;
name="sd" class="scsi"
target=1 lun=4;
name="sd" class="scsi"
target=1 lun=5;
name="sd" class="scsi"
target=1 lun=6;
name="sd" class="scsi"
target=1 lun=7;
.
.
.
name="sd" class="scsi"
target=1 lun=31;
name="sd" class="scsi"
target=3 lun=1;
name="sd" class="scsi"
target=3 lun=2;
name="sd" class="scsi"
target=3 lun=3;
name="sd" class="scsi"
target=3 lun=4;
name="sd" class="scsi"
target=3 lun=5;
name="sd" class="scsi"
target=3 lun=6;
name="sd" class="scsi"
target=3 lun=7;
name="sd" class="scsi"
target=3 lun=8;
# END additional lun entries
Output of Format command here
Searching Disks... Done
AVAILABLE DISK SELECTION:
0. c1t0d0
/pci at 1c,60000/SUNW,qlc at 4/fp at 0,0/ssd at w5000000
1.c1t1d0
pci at 1c,60000/SUNW,qlc at 4/fp at 0,0/ssd at w5000000
2.c3t0d0
I have map the second partition as first but I dont know why should my second LUN is not visible .
Pls. help me on that issue
thanks in advance
Sanjay Chahar
Indiatimes Email now powered by APIC Advantage. Help!
HelpClick on the image to chat with me
Comments
Got something to say?
You must be logged in to post a comment.
