SLC serial port(s) pinout
2007-12-25 7:22:00
The pinout for the combination A/B serial ports on the 4/20 are:
========================================================
I received the following from my Sun Tech Rep after much ado... This
was faxed to me handwritten, so use with your own judgement. You
should concentrate on the first three columns, unless you are using the
splitter cable that they sell. If you are only using /dev/ttya you
should be able to disregard what they did with serial port B.
CPU Peripheral-A Peripheral-B
Pin Signal Port Pin Signal Pin Signal
2 TD A 2 TD
3 RD A 3 RD
4 RTS A 4 RTS
5 CTS A 5 CTS
6 DSR A 6 DSR
7 GND A 7 GND
8 DCD A 8 DCD
12 DCD B 8 DCD
13 CTS B 5 CTS
14 TD B 2 TD
15 TC A 15 TC
16 RD B 3 RD
17 RC A 17 RC
19 RTS B 4 RTS
20 DTR A 20 DTR
24 TCO A 24 TCO
==============================================================
Wire these pins straight through for the A port:
SLC use A port
1 protective ground 1
2 TD (transmitted data) 2
3 RD (received data) 3
4 RTS 4
5 CTS 5
6 DSR 6
7 signal ground 7
8 DCD 8
20 DTR 20
22 RI 22
Wire these pins to the B port:
SLC use B port
1 protective ground 1
7 signal ground 7
13 secondary CTS 5
14 secondary TD 2
16 secondary RD 3
19 secondary RTS 4
Note that pins 1 and 7 are common to both ports.
Thanks again to:
Gil Tene devil@techunix.technion.ac.il
Ray Smith rcsmith@analytics.com
Micky Liu micky@cunixf.cc.columbia.edu
Comments
Got something to say?
You must be logged in to post a comment.
