using disk SEAGATE ST31940W

2008-1-7 0:21:00

Hi suners,

finaly I found out that the internal cabel in external box was bad.

Thanks to all who responded.

Jozef

hera are the original question:

Hi suners,

did you manage to get work external disk SEAGATE ST31940W Medalist

with Netra I 170E or Ultra 1/170E which has wide external SCSI conector.

I conected this external disk to Netra I 170E. In ok prompt I saw

this disk througt probe-scsi, then i boot mechine with -r parameter

to reconfigure kernel, but during booting i saw messages

like cannot write in wide mode and then cannot read from disk

sd2 ( which is this one ). In machine are two disk sd0 and sd1, there

is no other external devices.

I used this disk with ultra1/143 and it works in narrow mode cause

this ultra has only narrow SCSI.

First I suspected external cable, but it didn't work with

the other new one either.

--------------------------------------------------------------------

Jozef Rujak e-mail: dodi@intas.sk

INTAS phone: +421 95 6335012

Stromova 10 fax: +421 95 6335013

Slovak Republic

--------------------------------------------------------------------

Actived: 0 answers; - size: 1398 bytes; - view related info - Similar thread

Got something to say?

You must be logged in to post a comment.

thatsjava.com