SUMMARY: HBA (QLA2100) Drives not Visible After Solaris 8 Upgrade
2007-12-24 21:56:00
The resolution was to copy the extra entries in the sd.conf file I had
running under 2.7 to /kernel/drv/sd.conf. The devices had SCSI ID's >
15 which were not defined in the sd.conf that the 2.8 upgrade had
written.
After replacing the extra sd.conf entries, I rebooted. It came up
cleanly, and metainit didn't complain as it had been doing in the past.
I picked up the additional metadb replicas on the external drives, so I
didn't need to make any adjustments to the metadb's. I have mounted the
filesystem read-only and it looks like all of the data is intact.
Thanks,
Brian Credeur
eXcellence in IS Soutions, Inc.
My original message is attached, below.
X-POP3-Rcpt: bcredeur at x-iss.com
Received: from heimdal.silverthread.net
(adsl-65-69-217-138.dsl.hstntx.swbell.net [65.69.217.138]) by
server2800.net (8.10.2/8.10.2) with ESMTP id g1IF4ts14101 for
<bcredeur at x-iss.com>; Mon, 18 Feb 2002 10:04:56 -0500
Received: from silverthread.net (herc.silverthread.net [192.168.1.21])
by heimdal.silverthread.net (8.9.3/8.9.3) with ESMTP id JAA01140; Mon,
18 Feb 2002 09:00:04 -0600
Message-ID: <3C711809.2040902 at silverthread.net>
Date: Mon, 18 Feb 2002 09:04:41 -0600
From: Brian Credeur <x-iss at silverthread.net>
Organization: Silverthread Computers
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:0.9.4)
Gecko/20011128 Netscape6/6.2.1
X-Accept-Language: en-us
MIME-Version: 1.0
To: support at qlogic.com
CC: "Brian Credeur (X-ISS)" <bcredeur at x-iss.com>
Subject: HBA (QLA2100) Drives not Visible After Solaris 8 Upgrade
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
X-Mozilla-Status2: 00000000
I have upgraded an Ultra-80 from Solaris 2.7 to 2.8.
The system partitions are on the internal drive (c0t0d0) and an external
array is attached with a QLogic QLA2100 copper fiber channel HBA. The
system drive and various tape and cdrom devices are visible and
functioning well under 2.8. The devices c1t34d0s?, etc are not visible
to the system after upgrading to Solaris 2.8. I have updated the
qla2100 driver from the 2.x version that run under Solaris 2.7 to the
most recent version 3.0.3--which is designed to work with Solaris
2.8--and the results are the same.
The QLA2100 driver loads and the yellow warning light on the Polaris
drive enclosure goes off, indicating the HBA's presence. It appears
that the HBA recognizes the drives, as shown by dmesg:
(For those who care to see the rest of the dmesg output it's at the end
of this message.)
Feb 17 22:41:52 loki qla2100: [ID 379160 kern.notice] QLogic qla2100
Fibre Channel Driver v3.03 Instance: 0. Firmware v1.19.12.
Feb 17 22:41:53 loki qla2100: [ID 364886 kern.info]
qla2100-hba0-adapter-node-name="200000e08b01a729";
Feb 17 22:41:53 loki qla2100: [ID 358785 kern.info]
qla2100-hba0-adapter-port-name="210000e08b01a729";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-34-fibre-channel-name="2000002037290489";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-35-fibre-channel-name="20000020372904d3";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-36-fibre-channel-name="20000020372903ad";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-37-fibre-channel-name="2000002037290383";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-38-fibre-channel-name="200000203729017e";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-39-fibre-channel-name="2000002037290139";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-41-fibre-channel-name="20000020372900f1";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-42-fibre-channel-name="2000002037290151";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-45-fibre-channel-name="2000002037290148";
Feb 17 22:41:53 loki pcipsy: [ID 370704 kern.info] PCI-device: scsi at 1,
qla21000
Feb 17 22:41:53 loki genunix: [ID 936769 kern.info] qla21000 is
/pci at 1f,2000/scsi at 1
The format command doesn't show the external devices c1t37d0, etc. nor
does prtvtoc:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248>
/pci at 1f,4000/scsi at 3/sd at 0,0
Specify disk (enter its number):
# prtvtoc /dev/rdsk/c1t37d0s6
prtvtoc: /dev/rdsk/c1t37d0s6: No such device or address
I have run 'devfsadm' and also tried a 'boot -r' but the devices are
still not visible to the system, though the following bindings are listed
# ls -l /dev/dsk/c1*
lrwxrwxrwx 1 root root 42 Jun 11 2001 /dev/dsk/c1t34d0s0
-> ..http://devices/pci at 1f,2000/scsi at 1/sd at 22,0:a
lrwxrwxrwx 1 root root 42 Jun 11 2001 /dev/dsk/c1t34d0s1
-> ..http://devices/pci at 1f,2000/scsi at 1/sd at 22,0:b
...
lrwxrwxrwx 1 root root 42 Jun 11 2001 /dev/dsk/c1t45d0s5
-> ..http://devices/pci at 1f,2000/scsi at 1/sd at 2d,0:f
lrwxrwxrwx 1 root root 42 Jun 11 2001 /dev/dsk/c1t45d0s6
-> ..http://devices/pci at 1f,2000/scsi at 1/sd at 2d,0:g
lrwxrwxrwx 1 root root 42 Jun 11 2001 /dev/dsk/c1t45d0s7
-> ..http://devices/pci at 1f,2000/scsi at 1/sd at 2d,0:h
The these symbolic links point to existing entries in /devices:
# ls /devices/pci at 1f,2000/scsi at 1/sd at 2*
/devices/pci at 1f,2000/scsi at 1/sd at 22,0:a
/devices/pci at 1f,2000/scsi at 1/sd at 22,0:a,raw
/devices/pci at 1f,2000/scsi at 1/sd at 22,0:b
/devices/pci at 1f,2000/scsi at 1/sd at 22,0:b,raw
...
/devices/pci at 1f,2000/scsi at 1/sd at 2d,0:h
/devices/pci at 1f,2000/scsi at 1/sd at 2d,0:h,raw
Has anyone performed a Solaris 2.7 -> 2.8 upgrade with one of these
adapters or installed on from scratch on a 2.8 system? If so, could you
send me the "recipe" you followed? Any suggestions are welcome.
FURTHER DETAILS:
The 9 drives in the array were concatenated into one metadevice (md0)
under Solaris 2.7.
Following the steps outlined in a previous posting "SUMMARY: Preserving
DiskSuite metadevices across and upgrade", I have come to a wall at step
5, where I am to run metadb -a -f deviceA deviceB ...
The metadb -a -f command fails with "No such device or address", as follows:
# metadb
flags first blk block count
a m pc lu 16 1034 /dev/dsk/c0t0d0s4
a pc l 1050 1034 /dev/dsk/c0t0d0s4
a pc l 2084 1034 /dev/dsk/c0t0d0s4
M pc unknown unknown /dev/dsk/c1t37d0s6
M pc unknown unknown /dev/dsk/c1t38d0s6
M pc unknown unknown /dev/dsk/c1t39d0s6
M pc unknown unknown /dev/dsk/c1t41d0s6
M pc unknown unknown /dev/dsk/c1t42d0s6
M pc unknown unknown /dev/dsk/c1t45d0s6
# metadb -a -f c1t38d0s6
metadb: loki: /dev/dsk/c1t38d0s6: No such device or address
The full dmesg output for a boot cycle is:
Feb 17 22:41:52 loki genunix: [ID 540533 kern.notice] ^MSunOS Release
5.8 Version Generic_108528-11 64-bit
Feb 17 22:41:52 loki genunix: [ID 913631 kern.notice] Copyright
1983-2001 Sun Microsystems, Inc. All rights reserved.
Feb 17 22:41:52 loki genunix: [ID 678236 kern.info] Ethernet address =
8:0:20:c5:3:4c
Feb 17 22:41:52 loki unix: [ID 389951 kern.info] mem = 4194304K
(0x100000000)
Feb 17 22:41:52 loki unix: [ID 930857 kern.info] avail mem = 4120698880
Feb 17 22:41:52 loki rootnex: [ID 466748 kern.info] root nexus = Sun
Ultra 80 UPA/PCI (4 X UltraSPARC-II 450MHz)
Feb 17 22:41:52 loki rootnex: [ID 349649 kern.info] pcipsy0 at root: UPA
0x1f 0x4000
Feb 17 22:41:52 loki genunix: [ID 936769 kern.info] pcipsy0 is /pci at 1f,4000
Feb 17 22:41:52 loki rootnex: [ID 349649 kern.info] pcipsy1 at root: UPA
0x1f 0x2000
Feb 17 22:41:52 loki genunix: [ID 936769 kern.info] pcipsy1 is /pci at 1f,2000
Feb 17 22:41:52 loki scsi: [ID 365881 kern.info] /pci at 1f,4000/scsi at 3 (glm0):
Feb 17 22:41:52 loki Rev. 5 Symbios 53c875 found.
Feb 17 22:41:52 loki pcipsy: [ID 370704 kern.info] PCI-device: scsi at 3, glm0
Feb 17 22:41:52 loki genunix: [ID 936769 kern.info] glm0 is
/pci at 1f,4000/scsi at 3
Feb 17 22:41:52 loki scsi: [ID 365881 kern.info] /pci at 1f,4000/scsi at 3,1
(glm1):
Feb 17 22:41:52 loki Rev. 5 Symbios 53c875 found.
Feb 17 22:41:52 loki pcipsy: [ID 370704 kern.info] PCI-device: scsi at 3,1,
glm1
Feb 17 22:41:52 loki genunix: [ID 936769 kern.info] glm1 is
/pci at 1f,4000/scsi at 3,1
Feb 17 22:41:52 loki scsi: [ID 365881 kern.info] /pci at 1f,4000/scsi at 4 (glm4):
Feb 17 22:41:52 loki Rev. 5 Symbios 53c875 found.
Feb 17 22:41:52 loki pcipsy: [ID 370704 kern.info] PCI-device: scsi at 4, glm4
Feb 17 22:41:52 loki genunix: [ID 936769 kern.info] glm4 is
/pci at 1f,4000/scsi at 4
Feb 17 22:41:52 loki scsi: [ID 365881 kern.info] /pci at 1f,4000/scsi at 4,1
(glm5):
Feb 17 22:41:52 loki Rev. 5 Symbios 53c875 found.
Feb 17 22:41:52 loki pcipsy: [ID 370704 kern.info] PCI-device: scsi at 4,1,
glm5
Feb 17 22:41:52 loki genunix: [ID 936769 kern.info] glm5 is
/pci at 1f,4000/scsi at 4,1
Feb 17 22:41:52 loki scsi: [ID 365881 kern.info] /pci at 1f,4000/scsi at 5 (glm6):
Feb 17 22:41:52 loki Rev. 5 Symbios 53c875 found.
Feb 17 22:41:52 loki pcipsy: [ID 370704 kern.info] PCI-device: scsi at 5, glm6
Feb 17 22:41:52 loki genunix: [ID 936769 kern.info] glm6 is
/pci at 1f,4000/scsi at 5
Feb 17 22:41:52 loki scsi: [ID 365881 kern.info] /pci at 1f,4000/scsi at 5,1
(glm7):
Feb 17 22:41:52 loki Rev. 5 Symbios 53c875 found.
Feb 17 22:41:52 loki pcipsy: [ID 370704 kern.info] PCI-device: scsi at 5,1,
glm7
Feb 17 22:41:52 loki genunix: [ID 936769 kern.info] glm7 is
/pci at 1f,4000/scsi at 5,1
Feb 17 22:41:52 loki qla2100: [ID 379160 kern.notice] QLogic qla2100
Fibre Channel Driver v3.03 Instance: 0. Firmware v1.19.12.
Feb 17 22:41:53 loki qla2100: [ID 364886 kern.info]
qla2100-hba0-adapter-node-name="200000e08b01a729";
Feb 17 22:41:53 loki qla2100: [ID 358785 kern.info]
qla2100-hba0-adapter-port-name="210000e08b01a729";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-34-fibre-channel-name="2000002037290489";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-35-fibre-channel-name="20000020372904d3";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-36-fibre-channel-name="20000020372903ad";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-37-fibre-channel-name="2000002037290383";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-38-fibre-channel-name="200000203729017e";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-39-fibre-channel-name="2000002037290139";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-41-fibre-channel-name="20000020372900f1";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-42-fibre-channel-name="2000002037290151";
Feb 17 22:41:53 loki qla2100: [ID 139169 kern.info]
qla2100-hba0-SCSI-target-id-45-fibre-channel-name="2000002037290148";
Feb 17 22:41:53 loki pcipsy: [ID 370704 kern.info] PCI-device: scsi at 1,
qla21000
Feb 17 22:41:53 loki genunix: [ID 936769 kern.info] qla21000 is
/pci at 1f,2000/scsi at 1
Feb 17 22:41:53 loki scsi: [ID 193665 kern.info] sd0 at glm0: target 0 lun 0
Feb 17 22:41:53 loki genunix: [ID 936769 kern.info] sd0 is
/pci at 1f,4000/scsi at 3/sd at 0,0
Feb 17 22:41:53 loki scsi: [ID 365881 kern.info] <SUN18G cyl 7506
alt 2 hd 19 sec 248>
Feb 17 22:41:55 loki scsi: [ID 193665 kern.info] sd6 at glm0: target 6 lun 0
Feb 17 22:41:55 loki genunix: [ID 936769 kern.info] sd6 is
/pci at 1f,4000/scsi at 3/sd at 6,0
Feb 17 22:41:59 loki swapgeneric: [ID 308332 kern.info] root on
/pci at 1f,4000/scsi at 3/disk at 0,0:a fstype ufs
Feb 17 22:41:59 loki pcipsy: [ID 370704 kern.info] PCI-device: ebus at 1, ebus0
Feb 17 22:41:59 loki ebus: [ID 521012 kern.info] power0 at ebus0: offset
14,724000
Feb 17 22:41:59 loki genunix: [ID 936769 kern.info] power0 is
/pci at 1f,4000/ebus at 1/power at 14,724000
Feb 17 22:41:59 loki ebus: [ID 521012 kern.info] su0 at ebus0: offset
14,3083f8
Feb 17 22:41:59 loki genunix: [ID 936769 kern.info] su0 is
/pci at 1f,4000/ebus at 1/su at 14,3083f8
Feb 17 22:41:59 loki ebus: [ID 521012 kern.info] su1 at ebus0: offset
14,3062f8
Feb 17 22:41:59 loki genunix: [ID 936769 kern.info] su1 is
/pci at 1f,4000/ebus at 1/su at 14,3062f8
Feb 17 22:42:00 loki rootnex: [ID 349649 kern.info] afb0 at root: UPA
0x1e 0x0
Feb 17 22:42:00 loki genunix: [ID 936769 kern.info] afb0 is /SUNW,afb at 1e,0
Feb 17 22:42:00 loki unix: [ID 987524 kern.info] cpu0:
SUNW,UltraSPARC-II (upaid 0 impl 0x11 ver 0xa0 clock 450 MHz)
Feb 17 22:42:00 loki unix: [ID 987524 kern.info] cpu1:
SUNW,UltraSPARC-II (upaid 1 impl 0x11 ver 0xa0 clock 450 MHz)
Feb 17 22:42:00 loki unix: [ID 721127 kern.info] cpu 1 initialization
complete - online
Feb 17 22:42:00 loki unix: [ID 987524 kern.info] cpu2:
SUNW,UltraSPARC-II (upaid 2 impl 0x11 ver 0xa0 clock 450 MHz)
Feb 17 22:42:00 loki unix: [ID 721127 kern.info] cpu 2 initialization
complete - online
Feb 17 22:42:00 loki unix: [ID 987524 kern.info] cpu3:
SUNW,UltraSPARC-II (upaid 3 impl 0x11 ver 0xa0 clock 450 MHz)
Feb 17 22:42:00 loki unix: [ID 721127 kern.info] cpu 3 initialization
complete - online
Feb 17 22:42:00 loki ebus: [ID 521012 kern.info] se0 at ebus0: offset
14,400000
Feb 17 22:42:00 loki genunix: [ID 936769 kern.info] se0 is
/pci at 1f,4000/ebus at 1/se at 14,400000
Feb 17 22:42:01 loki hme: [ID 517527 kern.info] SUNW,hme0 : PCI IO 2.0
(Rev Id = c1) Found
Feb 17 22:42:01 loki pcipsy: [ID 370704 kern.info] PCI-device:
network at 1,1, hme0
Feb 17 22:42:01 loki genunix: [ID 936769 kern.info] hme0 is
/pci at 1f,4000/network at 1,1
Feb 17 22:42:05 loki hme: [ID 517527 kern.info] SUNW,hme0 : Internal
Transceiver Selected.
Feb 17 22:42:05 loki hme: [ID 517527 kern.info] SUNW,hme0 :
Auto-Negotiated 100 Mbps Full-Duplex Link Up
Feb 17 22:42:49 loki genunix: [ID 454863 kern.info] dump on
/dev/dsk/c0t0d0s1 size 4095 MB
Feb 17 22:42:52 loki pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Feb 17 22:42:52 loki genunix: [ID 936769 kern.info] devinfo0 is
/pseudo/devinfo at 0
Feb 17 22:42:58 loki scsi: [ID 365881 kern.info]
/pci at 1f,4000/scsi at 4,1/st at 3,0 (st38):
Feb 17 22:42:58 loki <Quantum DLT7000>
Feb 17 22:42:58 loki scsi: [ID 193665 kern.info] st38 at glm5: target 3
lun 0
Feb 17 22:42:58 loki genunix: [ID 936769 kern.info] st38 is
/pci at 1f,4000/scsi at 4,1/st at 3,0
Feb 17 22:42:58 loki scsi: [ID 365881 kern.info]
/pci at 1f,4000/scsi at 5,1/st at 4,0 (st53):
Feb 17 22:42:58 loki <Vendor 'FUJITSU ' Product 'M8100AA2 '>
Feb 17 22:42:58 loki scsi: [ID 193665 kern.info] st53 at glm7: target 4
lun 0
Feb 17 22:42:58 loki genunix: [ID 936769 kern.info] st53 is
/pci at 1f,4000/scsi at 5,1/st at 4,0
Feb 17 22:42:58 loki scsi: [ID 365881 kern.info]
/pci at 1f,4000/scsi at 3,1/st at 4,0 (st11):
Feb 17 22:42:58 loki <Exabyte EXB-8500 8mm Helical Scan>
Feb 17 22:42:58 loki scsi: [ID 193665 kern.info] st11 at glm1: target 4
lun 0
Feb 17 22:42:58 loki genunix: [ID 936769 kern.info] st11 is
/pci at 1f,4000/scsi at 3,1/st at 4,0
Feb 17 22:42:58 loki scsi: [ID 365881 kern.info]
/pci at 1f,4000/scsi at 3,1/st at 5,0 (st12):
Feb 17 22:42:58 loki <Exabyte EXB-8500 8mm Helical Scan>
Feb 17 22:42:58 loki scsi: [ID 193665 kern.info] st12 at glm1: target 5
lun 0
Feb 17 22:42:58 loki genunix: [ID 936769 kern.info] st12 is
/pci at 1f,4000/scsi at 3,1/st at 5,0
Feb 17 22:43:02 loki pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Feb 17 22:43:02 loki genunix: [ID 936769 kern.info] fssnap0 is
/pseudo/fssnap at 0
Feb 17 22:43:08 loki pseudo: [ID 129642 kern.info] pseudo-device: winlock0
Feb 17 22:43:08 loki genunix: [ID 936769 kern.info] winlock0 is
/pseudo/winlock at 0
Feb 17 22:43:08 loki pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Feb 17 22:43:08 loki genunix: [ID 936769 kern.info] lockstat0 is
/pseudo/lockstat at 0
Feb 17 22:43:08 loki pseudo: [ID 129642 kern.info] pseudo-device: vol0
Feb 17 22:43:08 loki genunix: [ID 936769 kern.info] vol0 is /pseudo/vol at 0
Feb 17 22:43:08 loki pseudo: [ID 129642 kern.info] pseudo-device: llc10
Feb 17 22:43:08 loki genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1 at 0
Feb 17 22:43:08 loki ebus: [ID 521012 kern.info] audiocs0 at ebus0:
offset 14,200000
Feb 17 22:43:08 loki genunix: [ID 936769 kern.info] audiocs0 is
/pci at 1f,4000/ebus at 1/SUNW,CS4231 at 14,200000
Feb 17 22:43:08 loki pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Feb 17 22:43:08 loki genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi at 0
Feb 17 22:43:09 loki ebus: [ID 521012 kern.info] ecpp0 at ebus0: offset
14,3043bc
Feb 17 22:43:09 loki genunix: [ID 936769 kern.info] ecpp0 is
/pci at 1f,4000/ebus at 1/ecpp at 14,3043bc
Feb 17 22:43:09 loki pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Feb 17 22:43:09 loki genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp at 0
Feb 17 22:43:09 loki pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Feb 17 22:43:09 loki genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm at 0
Feb 17 22:43:10 loki pseudo: [ID 129642 kern.info] pseudo-device: fcode0
Feb 17 22:43:10 loki genunix: [ID 936769 kern.info] fcode0 is
/pseudo/fcode at 0
Feb 17 22:47:23 loki statd[198]: [ID 859811 daemon.warning] statd: host
ipv4.192.1.1.9 is not responding
Feb 17 22:49:23 loki statd[198]: [ID 859811 daemon.warning] statd: host
ipv4.192.1.1.7 is not responding
Feb 17 23:07:01 loki pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Feb 17 23:07:01 loki genunix: [ID 936769 kern.info] devinfo0 is
/pseudo/devinfo at 0
Feb 17 23:17:37 loki scsi: [ID 365881 kern.info]
/pci at 1f,4000/scsi at 4,1/st at 3,0 (st38):
Feb 17 23:17:37 loki <Quantum DLT7000>
Feb 17 23:17:37 loki scsi: [ID 193665 kern.info] st38 at glm5: target 3
lun 0
Feb 17 23:17:37 loki genunix: [ID 936769 kern.info] st38 is
/pci at 1f,4000/scsi at 4,1/st at 3,0
Feb 17 23:17:37 loki scsi: [ID 365881 kern.info]
/pci at 1f,4000/scsi at 3,1/st at 4,0 (st11):
Feb 17 23:17:37 loki <Exabyte EXB-8500 8mm Helical Scan>
Feb 17 23:17:37 loki scsi: [ID 193665 kern.info] st11 at glm1: target 4
lun 0
Feb 17 23:17:37 loki genunix: [ID 936769 kern.info] st11 is
/pci at 1f,4000/scsi at 3,1/st at 4,0
Feb 17 23:17:37 loki scsi: [ID 365881 kern.info]
/pci at 1f,4000/scsi at 5,1/st at 4,0 (st53):
Feb 17 23:17:37 loki <Vendor 'FUJITSU ' Product 'M8100AA2 '>
Feb 17 23:17:37 loki scsi: [ID 193665 kern.info] st53 at glm7: target 4
lun 0
Feb 17 23:17:37 loki genunix: [ID 936769 kern.info] st53 is
/pci at 1f,4000/scsi at 5,1/st at 4,0
Feb 17 23:17:37 loki scsi: [ID 365881 kern.info]
/pci at 1f,4000/scsi at 3,1/st at 5,0 (st12):
Feb 17 23:17:37 loki <Exabyte EXB-8500 8mm Helical Scan>
Feb 17 23:17:37 loki scsi: [ID 193665 kern.info] st12 at glm1: target 5
lun 0
Feb 17 23:17:37 loki genunix: [ID 936769 kern.info] st12 is
/pci at 1f,4000/scsi at 3,1/st at 5,0
Feb 17 23:17:40 loki pseudo: [ID 129642 kern.info] pseudo-device: fssnap0
Feb 17 23:17:40 loki genunix: [ID 936769 kern.info] fssnap0 is
/pseudo/fssnap at 0
Feb 17 23:17:45 loki pseudo: [ID 129642 kern.info] pseudo-device: lockstat0
Feb 17 23:17:45 loki genunix: [ID 936769 kern.info] lockstat0 is
/pseudo/lockstat at 0
Feb 17 23:17:45 loki pseudo: [ID 129642 kern.info] pseudo-device: llc10
Feb 17 23:17:45 loki genunix: [ID 936769 kern.info] llc10 is /pseudo/llc1 at 0
Feb 17 23:17:45 loki ebus: [ID 521012 kern.info] audiocs0 at ebus0:
offset 14,200000
Feb 17 23:17:45 loki genunix: [ID 936769 kern.info] audiocs0 is
/pci at 1f,4000/ebus at 1/SUNW,CS4231 at 14,200000
Feb 17 23:17:45 loki pseudo: [ID 129642 kern.info] pseudo-device: lofi0
Feb 17 23:17:45 loki genunix: [ID 936769 kern.info] lofi0 is /pseudo/lofi at 0
Feb 17 23:17:46 loki ebus: [ID 521012 kern.info] ecpp0 at ebus0: offset
14,3043bc
Feb 17 23:17:46 loki genunix: [ID 936769 kern.info] ecpp0 is
/pci at 1f,4000/ebus at 1/ecpp at 14,3043bc
Feb 17 23:17:46 loki pseudo: [ID 129642 kern.info] pseudo-device: fcp0
Feb 17 23:17:46 loki genunix: [ID 936769 kern.info] fcp0 is /pseudo/fcp at 0
Feb 17 23:17:46 loki pseudo: [ID 129642 kern.info] pseudo-device: rsm0
Feb 17 23:17:46 loki genunix: [ID 936769 kern.info] rsm0 is /pseudo/rsm at 0
Feb 17 23:30:23 loki scsi: [ID 107833 kern.notice]
/pci at 1f,4000/scsi at 5,1/st at 4,0 (st53):
Feb 17 23:30:23 loki Variable record length I/O
Thanks,
Brian Credeur
eXcellence in IS Solutions, Inc. (X-ISS)
(713) 339-7223
Comments
Got something to say?
You must be logged in to post a comment.
