SYM8751SP hapiness & sadness
2007-12-24 23:29:00
Finally I got an SCSI PCI SYM8751SP that is supposed
to work on Solaris. My Ultra 5 ( w/ Solaris 9 ) is
upgraded the OBP to 3.31.0. The SYM8751SP is flashed
to 4.19 ( downloaded from lsilogic ).
- Sadness:
After power on and going to OBP, probe-scs-all shows
the hard drive and ok. After booting to Solaris 9,
any access to the hard drive ( by touch /reconfigure
or by format ) gives the following warning:
WARNING: /pci at 1f,0/pci at 1/scsi at 1 (glm1):
Connected command timeout for Target 0.0
WARNING: /pci at 1f,0/pci at 1/scsi at 1 (glm1):
got SCSI bus reset
WARNING: /pci at 1f,0/pci at 1/scsi at 1 (glm1):
Connected command timeout for Target 1.0
WARNING: /pci at 1f,0/pci at 1/scsi at 1 (glm1):
got SCSI bus reset
[...]
All suggestions are appreciated.
Thanks,
DT
PS:
The card and scsi drive work under Windows.
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com
Comments
Got something to say?
You must be logged in to post a comment.
