SCSI transport failed messages
2007-12-24 20:19:00
Once in a while the following `SCSI transport error` messages are showing
up in /var/adm/messages file,
here at my client site, we have E4500s attached to "fortra arrays" thru JNI
cards.
Operating System: Solaris 8
JNI Drivers: =09
=20
PKGINST: JNIfcaPCI
NAME: JNI Fibre Channel SCSI/IP HBA Driver (PCI)
CATEGORY: system,scsi,network
ARCH: sparc
VERSION: 2.5.14
VENDOR: JNI
PSTAMP: oiler20010208114337
INSTDATE: Jun 14 2001 10:08
EMAIL: support at jni.com <mailto:support at jni.com>
STATUS: completely installed
FILES: 8 installed pathnames
1 shared pathnames
2 directories
2 executables
2543 blocks used (approx)
Jul 9 21:26:41 castor fca-pci: [ID 451854 kern.notice] fca-pci0: Target 0:
Port 0000EF (1000005013D00933:2000005013D00933) offline.
Jul 9 21:26:41 castor scsi: [ID 107833 kern.warning] WARNING:
/pci at 2,2000/fibre-channel at 2/sd at 0,e (sd111):
Jul 9 21:26:41 castor SCSI transport failed: reason 'tran_err': retrying
command
Jul 9 21:26:41 castor fca-pci: [ID 297457 kern.notice] NOTICE:
pci1242,46430 LOOP Initialization Complete, AL_PA=3D01
Jul 9 21:26:41 castor fca-pci: [ID 451854 kern.notice] fca-pci0: LINK UP =
=20
(98000200)
Jul 9 21:26:41 castor fca-pci: [ID 451854 kern.notice] fca-pci0: Host:
Port 000001 (100000E069C0420B:200000E069C0420B)
Jul 9 21:26:42 castor fca-pci: [ID 451854 kern.notice] fca-pci0: Target 0:
Port 0000EF (1000005013D00933:2000005013D00933) online.
Jul 9 21:26:42 castor scsi: [ID 107833 kern.warning] WARNING:
/pci at 2,2000/fibre-channel at 2/sd at 0,10 (sd113):
Jul 9 21:26:42 castor SCSI transport failed: reason 'tran_err': retrying
command
Jul 9 21:26:42 castor scsi: [ID 107833 kern.warning] WARNING:
/pci at 2,2000/fibre-channel at 2/sd at 0,f (sd112):
Jul 9 21:26:42 castor SCSI transport failed: reason 'tran_err': retrying
command
Jul 9 21:26:43 castor scsi: [ID 107833 kern.warning] WARNING:
/pci at 2,2000/fibre-channel at 2/sd at 0,8 (sd105):
Jul 9 21:26:43 castor SCSI transport failed: reason 'tran_err': retrying
command
Jul 9 21:26:43 castor scsi: [ID 107833 kern.warning] WARNING:
/pci at 2,2000/fibre-channel at 2/sd at 0,7 (sd104):
Jul 9 21:26:43 castor SCSI transport failed: reason 'tran_err': retrying
command
Jul 9 21:26:43 castor scsi: [ID 107833 kern.warning] WARNING:
/pci at 2,2000/fibre-channel at 2/sd at 0,3 (sd100):
Jul 9 21:26:43 castor SCSI transport failed: reason 'tran_err': retrying
command
Jul 9 21:26:43 castor scsi: [ID 107833 kern.warning] WARNING:
/pci at 2,2000/fibre-channel at 2/sd at 0,0 (sd30):
Jul 9 21:26:43 castor SCSI transport failed: reason 'tran_err': retrying
command
So, what could be the gotcha, which is causing these messages to show up.
Any pointers will
be much helpful in identifying the cause.
thanks!
Asim
Comments
Got something to say?
You must be logged in to post a comment.
