Tape ufsdump errors

2007-12-25 10:22:00

Great responses. Thx!.

My negligence - I didn't mention that I tried using another tape to no

avail and was able to successfully do a remote backup (ufsdump 0uf

remoteserver:/dev/rmt/0 /data). The culprit turns out to be a faulty tape

drive.

>Date: Thu, 14 May 1998 12:25:14 -0400

>To: sun-managers@ra.mcs.anl.gov

>From: "Michael A. Allen" <michael.allen@jhuapl.edu>

>Subject: Fwd: RE: Tape ufsdump errors

>

>Date: Thu, 14 May 1998 11:56:07 -0400

>To: sun-managers-requests@ra.mcs.anl.gov

>From: "Michael A. Allen" <michael.allen@jhuapl.edu>

>Subject: RE: Tape ufsdump errors

>

>Admins:

>

>Can someone give some insight on the below? There are no address

conflicts. The user explained that the script was working properly 2 weeks

prior to the errors. No additional s/w has been added. I did notice that

"/" is at 100%. Thanks in advance for you help.

>

>Michael Allen

>UNIX Systems Support

>JHU/APL ADI

>443 778 8513

>

>

>>Level 0 dump of the following partitions to tape aplcore project 2

>> Partition aplcore:/, tape file 1

>> DUMP: Writing 32 Kilobyte records

>> DUMP: Date of this level 0 dump: Thu May 14 02:30:02 1998

>> DUMP: Date of last level 0 dump: the epoch

>> DUMP: Dumping /dev/rdsk/c0t0d0s0 (aplcore.jhuapl.edu:/) to /dev/rmt/0hn.

>> DUMP: Mapping (Pass I) [regular files]

>> DUMP: Mapping (Pass II) [directories]

>> DUMP: Estimated 195700 blocks (95.56MB) on 0.01 tapes.

>> DUMP: Dumping (Pass III) [directories]

>> DUMP: Dumping (Pass IV) [regular files]

>> DUMP: Write error 6 feet into tape 1

>> DUMP: NEEDS ATTENTION: Do you want to restart?: ("yes" or "no")

DUMP: The E

>>NTIRE dump is aborted.

>> Partition aplcore:/usr, tape file 2

>> DUMP: Writing 32 Kilobyte records

>> DUMP: Date of this level 0 dump: Thu May 14 02:31:11 1998

>> DUMP: Date of last level 0 dump: the epoch

>> DUMP: Dumping /dev/rdsk/c0t0d0s3 (aplcore.jhuapl.edu:/usr) to

/dev/rmt/0hn.

>> DUMP: Mapping (Pass I) [regular files]

Comments

Got something to say?

You must be logged in to post a comment.