SUMMARY: RM6 (6.22.1) "Unable To Scan Module"
2007-12-25 1:53:00
disks out, I did boot -r, then boot -r with disks and I got back my arrays.
We also did upgrade firmware on our A1000 and now it looks good.
Thanks again to all for help
Chris
-----Original Message-----
From: Andres Rojas [mailto:arojasm at adexus.cl]
Sent: Tuesday, August 26, 2003 2:10 PM
To: Wianecki, Christopher
Subject: Re: RM6 (6.22.1) "Unable To Scan Module"
I found this suggestion in the Sunsolve database
See steps 4 & 5 on page 29 of 806-7792-14...
or
ftp://docs-pdf.sun.com/806-7792-14/806-7792-14.pdf
- Andres.
Have a small problem that I don't know how to resolve.
I had run script add32lun.sh that was located in rm6_6.22.1/Tools directory
so that I could create more than 8 LUN's on my A1000.
I restarted the system with boot -r then I went to create LIN 8 (which is
the 9th LUN on that array. After that I am getting messages "Unable To Scan
Module"
What I did wrong? Can I correct this error? Sun came over and they want to
replace controller, I think controller is just fine.
=====================================
./healthck -a
Health Check Summary Information
carlton_001: Unable To Scan Module
carlton_002: Optimal
healthck succeeded!
=====================================
./lad
c1t5d0 1T92678822 LUNS: 0 1 2 3 4 5 6 7 8
c2t5d0 1T92371006 LUNS: 0
=====================================
./raidutil -c c1t5d0 -i
LUNs found on c1t5d0.
LUN 0 RAID 0 17234 MB
LUN 1 RAID 0 17234 MB
LUN 2 RAID 0 17234 MB
LUN 3 RAID 0 17234 MB
LUN 4 RAID 0 17234 MB
LUN 5 RAID 0 17234 MB
LUN 6 RAID 0 17234 MB
LUN 7 RAID 0 17234 MB
Can't open device 1T92678822:8 status = 8. Aborting
raidutil failed!
=====================================
I think that 9th LUN is giving me a problem. How can I correct this error?
Files that were modified:
/etc/osa/rmparams
/kernel/drv/sd.conf
/kernel/drv/rdriver.conf
=====================================
./add32lun.sh
add32lun could caused /etc/osa/rmparams, /kernel/drv/sd.conf and
/kernel/drv/rdriver.conf to be modified. Please make a backup copy
of these files, exit all RM6 applications then type yes to continue
or no to terminate (yes/no)? yes
add32lun: Please perform a reconfiguration boot (boot -r) on the system
at your next convenience so the driver can address the additional luns.
=====================================
Help is greatly appreciated.
Thank you.
Chris
www.sothebys.com
**********************************************************************
_______________________________________________
codeprof mailing list
codeprof at codeprof.com
http://www.codeprof.com/execute/ask/?codeinfoid=25198
www.sothebys.com
**********************************************************************
Comments
Got something to say?
You must be logged in to post a comment.
