metasets on shared 3310's - any storage gurus out there ?
2007-12-25 4:09:00
I have check path_to_inst same for the disk c3t0d0 is same on both
nodes
................
Hi All,
I have two V240 cross-connected via scsi to two 3310 raid arrays,
i have created metaset obeoradisks and added one of the shared disks (
raid5 of whole 3310 ) to it,
Trying to add the other but fails with
# metaset -s obeoradisks -a c3t0d0
metaset: obeora2: obeoradisks: drive c3t0d0 is not common with host
obeora1
any clues ? if i edit partition table of the c3t0d0 on one node i can
see changes on the other so - it is "shared"
my metaset output so far
# metaset
Set name = obeoradisks, Set number = 1
Host Owner
obeora1
obeora2 Yes
Drive Dbase
c5t0d0 Yes
MORE INFO
outputs of probe-scsi-all are identical ( thanks matt clausen ! )
on node 1 i have configured
sccli> show luns
Ch Tgt LUN ld/lv ID-Partition Assigned Filter Map
--------------------------------------------------------------
1 0 0 ld0 1B6F245E-00 Primary
3 0 0 ld0 1B6F245E-00 Primary
on node 2 i have configured
sccli> show luns
Ch Tgt LUN ld/lv ID-Partition Assigned Filter Map
--------------------------------------------------------------
1 0 0 ld0 1B6F245E-00 Primary
3 0 0 ld0 1B6F245E-00 Primary
see format outs
Node1
2. c3t0d0 <SUN-StorEdge3310-0325 cyl 34746 alt 2 hd 127 sec 64>
/pci at 1e,600000/pci at 2/scsi at 4/sd at 5,0
3. c5t0d0 <SUN-StorEdge3310-0325 cyl 34746 alt 2 hd 127 sec 64>
/pci at 1e,600000/pci at 3/scsi at 4/sd at 5,0
Node2
2. c3t0d0 <SUN-StorEdge3310-0325 cyl 34746 alt 2 hd 127 sec 64>
/pci at 1e,600000/pci at 2/scsi at 4/sd at 0,0
3. c5t0d0 <SUN-StorEdge3310-0325 cyl 34746 alt 2 hd 127 sec 64>
/pci at 1e,600000/pci at 3/scsi at 4/sd at 0,0
TIA
Laurence
For low fares and great deals on hotels, car hire and travel insurance visit http://www.aerlingus.com
of any action in reliance upon, this information by persons or entities
other than the intended recipient is prohibited.If you have received
this email in error please notify the sender immediately and delete
the material.
*******************************************************************************
Comments
Got something to say?
You must be logged in to post a comment.
