SUMMARY: SCSI ids of internal disks of an ultra 1
2007-12-24 21:38:00
Thank you for your replies. In fact normally i couldn't change the scsi id's
from internal disks of an ultra 1, but with one type of disks it works and this
were a seagate disk. By setting the jumpers of both disks to my desired id
the second disk is "or-ed" to the next one. For example:
- default is 0 and 1
- set the jumpers of both disks to id 2 -> first disk is 2, second disk is 3
I have tried this with 2 ibm disks, 2 seagate disks and 2 connor disks and only
with seagate it works.
But this is with no warranty.
Wolfgang
Here my orginal question:
>Hello managers.
>
>How could i change the scsi id of the internal disks of an ultra 1.
>Default they have the ids 0 and 1 but i need the ids 2 and 3.
>Jumpersettings of the disks are ignored.
>
>Wolfgang
------------------------------------------------------------------------
Wolfgang Leideck
ONSYS GmbH
Fon: +49 (0)621/60-44104
Fax: +49 (0)621/60-73744
E-Mail: Wolfgang.Leideck at onsys.de
Comments
Got something to say?
You must be logged in to post a comment.
