disk partitioned on solaris 2.5.1 not detected under SunOS 4.1.3
2007-12-25 11:50:00
on Wed, Nov 18, 1998 at 07:48:47PM -0800, Max Trummer <max@sequana.com> wrote:
> it's been a while since i ran a 4.1.3 machine, but off the top,
> scsi address 4 is generally reserved for a tape drive. look in your
> config file that's used when you build the kernel and see how the
> disks and tapes are configured. default scsi id's are 0-3 for disks,
> 4-5 for tapes 6 for cdrom. you may have to change the config file
> and rebuild the kernel.
Thank you Max! Changed to scsi id 2 and all works.
BB
--
Bevan Broun ph (08) 9380 1587
Computer Systems Officer fax (08) 9380 1065
Dept. Electrical and Electronic Engineering
University of Western Australia rm. G70
Comments
Got something to say?
You must be logged in to post a comment.
